With winter in full swing, the last thing you want is a faulty Amana gas furnace, which is why we offer 24/7 Amana gas furnace repairs. At Berks Energy Heating & Air Conditioning, we know how much a heating system contributes to a warm and comfortable home. This article will guide you through some of the most common problems that an Amana gas furnace can present and some valuable troubleshooting and repair tips for those problems.
Understanding Your Amana Gas Furnace
Amana gas furnaces are efficient and durable. Like any other appliances, however, they may experience some problems after some time. Being able to identify these signs of a malfunctioning furnace could get you quickly out of such problems and could save you from costly repairs later on.
3 Common Issues for Amana Gas Furnace Repairs
Furnace Will Not Turn On
One of the most common problems homeowners face with their units is an Amana gas furnace that won’t start. This problem may arise due to several reasons, including the following:
- Problems in Power Supply: The power supply to the furnace should be on, and the circuit breaker should not have tripped.
- Thermostat Malfunction: Your thermostat should be pre-set to “heat” and “auto.” The temperature setting should be higher than the present room temperature.
- Clogged filters: this restrict the airflow and may cause your furnace to shut down.
Inadequate Heating
If your Amana gas furnace is on but not heating well, here are some possible causes:
- Blockages within the Air Vents: Check to ensure that all vents within your house are open and free from blockages.
- Dirty Burners: As time passes, burners may get dirty and affect their effectiveness.
- Defective Pilot Light: In older models, this may be due to a faulty pilot light that cannot ignite properly.
Noise
Some strange noises from an Amana gas furnace suggest different problems:
- Rattling or clinking may be produced by a loose screw or maybe debris inside the system.
- Scraping sounds could mean some complications with the blower wheel.
- Bangs or popping can signify deeper problems that can only be resolved by calling in a professional.
At Home Amana Gas Furnace Repairs Troubleshooting
While some Amana gas furnace repairs require professional expertise, there are several troubleshooting steps you can take on your own before you call in the pros.
Checking and Replacing Air Filters
Dirty air filters are a common cause of furnace problems. To address this:
- Locate your furnace’s air filter.
- Remove the old filter and check its condition.
- If it’s dirty, replace it with a new one of the same size and type.
Changing your filters regularly will do much to increase your furnace’s performance and efficiency.
Checking the Thermostat
A faulty thermostat can also make your Amana gas furnace act up. Here are some things you can try:
- See if the display of the thermostat is on.
- Replace the batteries, if necessary.
- Make sure it is set to “heat” and “auto.”
Clean off any dust around the thermostat that may interfere with its sensors.
Checking the Pilot Light
For older Amana gas furnaces with a pilot light:
- Locate the pilot light assembly.
- Ensure that the pilot light is lit.
If it’s out, relight it safely by following your furnace’s instructions.
Remember, if you smell gas at any point, leave your home immediately and contact your gas company.
When to Call a Professional for Amana Gas Furnace Repairs
While some issues can be resolved through DIY methods, certain problems require professional attention. Here are signs that it’s time to call an expert for your Amana gas furnace repairs:
- Persistent Strange Noises: If unusual sounds continue after basic troubleshooting, it’s best to consult a professional.
- Gas Smell: Any detectable gas odor requires immediate professional intervention.
- Frequent Cycling: If your furnace turns on and off more often than usual, it may indicate a serious problem.
- Yellow Pilot Light: A healthy pilot light should be blue. A yellow flame could signify dangerous carbon monoxide production.
- Age of the Furnace: If your Amana gas furnace is over 15 years old and experiencing frequent issues, it might be time for a professional assessment.
5 Preventive Maintenance Tasks for Your Amana Gas Furnace
The best way to avoid major repairs to an Amana gas furnace is through regular maintenance. Here are some helpful tips to keep your system running smoothly:
- Schedule Annual Inspections: Before the heating season, have a professional inspect your furnace.
- Keep the Area Around Your Furnace Clean: Keep no clutter near your furnace that may ignite a fire.
- Monitor Your Energy Bills: An unexpected spike in your heating costs may mean that your furnace is losing some of its efficiency.Listen for Unusual Sounds: Familiarize yourself with your furnace’s normal operating sounds and be alert to any changes.
- Check for Proper Ventilation: Ensure your furnace’s vents and flues are clear of obstructions.
Ensuring Comfort with Proper Amana Gas Furnace Care
Understanding the basics of Amana gas furnace repairs will help you keep your home environment comfortable and, possibly, save on heating costs. Though some issues can be resolved through simple DIY methods, it is crucial to know when to seek professional help. Regular maintenance and timely attention to problems can extend the life of your Amana gas furnace and ensure it operates at peak efficiency.
At Berks Energy Heating & Air Conditioning, we’re committed to helping you keep your Amana gas furnace in top condition. Our team is here to ensure your home stays warm and cozy throughout the winter months with Amana gas furnace repairs.
Call us to learn more about the services offered at Berks Energy Heating & Air Conditioning and schedule yours today!
Stay up to date with the latest at Berks Energy Heating & Air Conditioning by following us on Facebook.